September 2018

According to dental researchers, advanced research and superior technology will bring radical changes in the dental care industry during the 21st century.

Dental implant is the most notable among these changes. Thirty years ago they were considered "quackery". Now they are the "gold standard" for replacing one or a full mouth of missing teeth.

Most dentists agree that dental implant appears as a great example of advanced dental care technology. A dental implant is an artificial tooth root that replaces a patient's missing natural tooth root. It establishes an ideal treatment option for those who have lost one or more teeth in the upper and or lower jaw due to accident, gum disease or some other traumatic experience. Whether making only one or two teeth or all of your teeth, this ace dental technique has become the standard for teeth replacement. New technologies, new implant designs, and new procedures have consistently made the use of implant quicker, easier, more reliable, and more affordable.

Dentures have been in use for more that 30 years. However, dental implants long ago surpassed dentures in providing a reliable treatment option for those who are missing all of their teeth. Fixed and removable bridges were once the standard of care for one or a few missing teeth. However, it is not the standard anymore. Now, single unit implants are used to replace one or a few missing teeth. This procedure is done without causing damage to the remaining teeth. This minimizes the need for further corrective dentistry along with the future cost and discomfort associated with it.

There are two basic approaches for placing and reconstructing dental implants. One is called immediately load and the other delayed load. With the immediate load technique, a tooth or teeth are built on one or more dental implants, on the same day when the implant is placed. The All on 4 technique is an example of immediate loading. Remaining bad teeth are removed, implants are place and the patient leaves that day with a new set of natural looking and functioning non-removable teeth. Delayed loading is commonly used when only one or two teeth require replacement. Because of bio-engineering concepts related to force and stress vectors it is often best to let single implants integrate for 4 to 6 months before they are loaded. A common exception to this single tooth delayed protocol is when a front tooth … More

With the rise in the problems related to tooth decay, teeth care and replacement techniques have attracted the attention of many across the world. One such technique is the placement of dental crowns. Let us have a look into the details of having a tooth crown in this article.

What are Dental Crowns?

A dental crown denotes a cap that has the shape of a tooth. This is often placed on top of a tooth to regain the size, structure, strength, shape and appearance of the same. Crowns generally cover all visible portion of the tooth and are seen well above the line of the gums.

Types of Dental Crowns

There are basically 4 different categories of crowns used by dentists.

Metal Tooth Crowns: This type of crowns is made up of gold, nickel, chromium or palladium alloys. They are very durable and support the process of chewing. They prove to be resistant to the wear and tear that teeth generally undergo. The biggest disadvantage of this type of crown is the color of the crown that is very much visible when placed in position. If you want to have a crown for tooth that care located at the backside, then this type of crown would prove to be the right choice.

Porcelain-Metal Fused Tooth Crowns: This type of crown looks natural and can be rated next to the ceramic type if the natural aspect of the artificial teeth is considered. However, they are often subjected to chipping and breakage.

All-Resin Tooth Crown: This type is pretty cheap compared to the other types of crowns. However, they may not prove to be durable and are very much sooner to fractures.

Ceramic or Porcelain Tooth Crown: This type of crown is the best choice when the natural appearance is considered as the most important factor. However, they are not strong and are subjected to wear and tear. However, they prove to be a remarkable choice for those with metal allergies.

Should you opt for a Dental Crown?

o If you have a weak tooth that has been cleaned recently, you might want to resort to a dental crown in case where most of the tooth has cracked already and is likely to be subjected to breakage.
o If you have broken a part of your tooth accidentally, then a tooth crown can pacify your needs better.
o If any of your … More

If you have to use dentures for normal eating and everyday wear, you certainly know how much of a headache they can be. Slipping, grating, or irritating dentistry can easily cause jaw pain and run the risk of infections. Dentures require frequent cleaning beyond normal brushing in order to retain their color, durability, and function. What is worst is how expensive the process can be if your dentures have fractured and new casts must be ordered. In many cases, dentures are such a frustration that it is a much better decision to do away with them altogether and pick up a new medical alternative to traditional dental substitutions. One day dental implants can be the key to a new, healthy mouth of teeth and a hassle-free approach to all eating or chewing problems that dentures cause.

Nearly all denture users report some semblance of pain or irritation with their products. This is because dentures are not naturally balanced and structured like naturally forming teeth, so that their use does not exactly follow like normal. First-time users of dentures are particularly vulnerable to extreme grinding on soft, newly exposed gums. Most denture adhesives are difficult and unsuitable to use, some will not last through the entire duration of a day, while still others form nasty-tasting chemical reactions with the bacteria in your mouth. Sadly, denture technology has come to an impasse – the difficulty in preparing a proper fit with sealed edges and no loose parts lies in the cost. Form fitting dentures are available for purchase, but can cost several times more than their basic counterparts can, certainly a hard decision for seniors living on a fixed income.

More than mere discomfort, however, can be serious pain. If the gums are too weak or poorly cleaned, the surface of the skin is broken to breaking and bleeding. In other cases, sores may grow that are extraordinarily painful to the touch and take days, sometimes even weeks, to vanish. The worst dangers of all, however, are infections that can sprout if the dentures have lodged particles underneath your mouth, most of the time, pain results from an imbalance in the ridges of the mouth. The complexities of bones and jaw muscles create a wavy, shifting map that a set of dentures will have difficulty settling upon. Jaw ridges are not uniform in any patients, so that no two people can wear … More

Dental implants cost is getting higher in the US and with insurers not willing to cover, people are in a fix about getting their teeth in order. Nowadays, everyone wants affordable dental implants as the need to look perfect is rising each year. And Americans are not disinclined to try out implants outside US choice and reasonable ways of doing it.

Costs are a third of US

It is high dental implants cost that is pushing more and more people to Mexico where it can be done at far cheaper rates compared to the US. Most dentists working in Mexico are experts and very well experienced, but their charges are almost a third of similar dentists coast to coast. For every implant in the US, basic costs increase from $ 1000 and could go over $ 30,000 in the US. But in Mexico you can save just about $ 3000 on each implant.

Dental implants cost diffenders depending on your teeth, gum quality and root with the structure of your jaw. If over adaptations and changes have to be done, costs could easily spiral up. If you had to do it in the US, you would either get insurance coverage or easy loans from lenders to get your implants done. And more people want to go for implants laately as wearing artificial teeth can be cumbersome and as you age, you get under to lose your teeth.

X-rays and oral examination to ascertain bone density

Dentists the world over go for bridging permanently by grinding them to a post to fill the gap caused by missing teeth. This is difficult and primarily the major reason for high dental implants cost. Mostly, other types of filling are not permanent in any way and you have to work on them while tooth implants are like your old tooth that had fallen off due to prime of life.

It also has the feel and look of normal tooth that also enhances your looks. It is not also a one-size-fits-all sort of procedure as success of implants is strong-minded how fast the region around heals.

In Mexico, dental implants cost is much less and not performed before the dentists do a detailed oral examination with x-rays. Without the bone density is perfect and the jawbone is in great shape, they will not make the implant. You may also require a bone graft with calcium … More

Dental implant surgery shows a high success rate of up to 95%. Majority of the patients who have chosen to undergo this procedure are found to be happy with their replacements and their new set of teeth. Therefore, implants show to be the best solution to the problem of missing teeth – trumping over bridges and dentures. However, even if dental restorations prove to be the best, there are instances when dental implant surgery pain and problems arise.

Although dental implant surgery pain occurs, it is very rare. Some of the common causes of dental implant surgery pain are fractures implants, rejected implants, poor implant placement, incorrect positioning, and low quality implants used.

One of the main reasons for tooth implant problems is that the implant failed to fuse together with the jawbone. This is called failure to osseointegrate. If there is not enough amount of jawbone to fuse with or the bone has been infected, it can lead to failure to fuse with the implant.

Too much stress or overloading can cause implant fraction. Incorrect position can also cause implant fraction.

A person who has the habit of smoking or heavy drinking can compromise the success of the surgery. Moreover, this can lead to other problems such as implant fracture or gum disease.

What Causes Dental Implant Rejection?

There are several causes of dental implant rejection. These includes insufficiency bone to fuse, infection, stress, and habitual grinding of teeth during sleep called bruxism. Poor dental hygiene can also lead to dental implant surgery pain and implant rejection.

When there is insufficient bone to fuse, usually the patient is subjected to bone grafting to increase the available jawbone. However, some patients are hesitant to undergo this procedure which is why they try to find other ways to get the implant without grafting. If the dentist recommends bone grafting, make sure that you follow the advice.

If the implant does not fuse properly into the jawbone, the implant can move and be dislocated. This can cause discomfort and pain. If this happens, a new type of implant should be used or a new restoration should be attached into the implant. In some cases, bone grafting may be required.

Infection can be caused by contamination during surgery. In some instances, bacteria can already be hiding in the jawbone and causes dental implant surgery pain afterwards.

Stress on teeth can also cause the … More

Dental Fillings: What are They?

Dental fillings are tools that are used in corrective dentistry with the aim of repairing the minimal tooth cracking, cavities and discredited surfaces of the teeth.

Choosing: Points to Ponder

When it comes to the choice of dental filling it is important to take up the following 4 factors into account:

Physical Property: The physical property of the dental materials is one of the pointers to be contemplated. This can refer to heat insulation property of the filling, chemical resistance and erosive tension of the filling, its bonding strength and the resistance it offers to the wear and tear it is likely to undergo.

Biocompatibility: Biocompatibility is the next important factor that needs intent consideration. This property in turn refers to general, immunological and bio-energetic biocompatibility. Toxicity of the material at cellular level is analyzed to determine the general biocompatibility. The individual's reaction to the material is the point of discussion in case of immunological biocompatibility. Bio-energetic biocompatibility deals with how the material reacts with the body at the energetic level. Dental material should be generally, immunologically and bio-energetically biocompatible.

Aesthetics : The look should be similar to that of the natural teeth. Dental fillings should be aesthetically appealing and remarkably attractive.

Application: The application of the chosen dental material should be easy and painless.

Aesthetic and Biocompatible Dental Fillings

Amalgam has been reported to be one of the very widely used dental filling materials. Since it contains 50% mercury in it, the use of it has raised several concerns and ambiguity still abounds even amid the fact that FDA and ADA have stated that the usage of amalgam as a dental filling is completely safe. In addition to the concern about amalgam's biocompatibility, it has also tested that it is not aesthetically appealing. Galloy is seen as one of best substitutes for amalgam since it is mercury free. It is mainly composed of tin, indium, gallium, copper and silver.

Direct composites are aesthetically appealing. They are inexpensive and easy to lay. They last long. But the composites contain petrochemical derivatives and hence can prove to be environmentally sensitive. Indirect composite inlays / outlays are considered when durability is the most important factor. These indirect composites can be made up of ceramics, gold or titanium.

Ceramic inlays / onlays are yet other option for dental materials. However, because they are aesthetically appealing, the usage of … More

The US is home to a large growing number of dental implant companies, whose implant manufacturing processes are performed in accordance with strict Food and Drug Administration policies. FDA monitors the manufacture of dental implants as closely as it does that of medical implants, with strict attention to sanitation and quality control.

What Dental Implant Companies Do

Dental implant companies produce all the components used in dental implant surgery; a dental implant is either screwed directly into a patient's jawbone, or built as a custom-fitted plate to be instated between the jawbone and gum.

The hardware of the dental implant is made of titanium, which is a metal highly compatible with the body's own systems and almost never causes and adverse reaction in the surrounding tissues. Titanium has been used for nearly forty years in hip transplantation.

The implant's visible tooth structure is of ceramic. How their titanium hardware and ceramic teeth are built and pieced together is the only thing differentiating the products of different dental implant companies, and different dentists may have preferences for different brands of implants.

Innovations From Dental Implant Companies

Dental implant companies are constantly looking for ways to improve their products and their market shares, and one of the recent innovations which many of them have adopted is the use of nanotechnology in their implant surface design. They claim that using nanotechnology will reduce healing time by as much as fifty percent and improve the integrity of the dental implant and bone bond.

Dental implant companies which have adopted this technology include 3i, Bicon, Astra Tech, and Straumann. Straumann's SLActive implants, in particular, have been well received by US dentists, but a survey indicated that many dentists using the SLActive implants did not realize they incorporated nanotechnology. A majority of the dentists surveyed said that among dental implant companies using the technology, 3i was the name the recognized most readily.

Another advance from the dental implant companies , and one which could have very far-reaching effects on the entire industry, is the introduction of the Immediate Load Implant from Sargon dental Implants. The Immediate Load Implant is inserted and "expanded" to fill the bone opening immediately, giving the implant much greater stability than is normal at the initial stage of the implant procedure. The FDA has approved the Immediate Load Implant, which has been criticized for causing very little bleeding or swelling.

Dental implant … More

Dental implant surgery is an outpatient procedure that is performed in multiple stages. This is a much more advanced alternative to partial or full dentures. These implants are different from traditional dentures in that they are fixed to the jaw bone. Unlike traditional removable drugs, they are permanently fixed and can not be removed. No regular adjustment or realignment is required.

The Preferred Dental Procedure

Today, tooth implant surgery is very common and many dentists and prosthodontists are qualified to perform it. Irrevocably damaged or decayed teeth can be replaced with permanent alternatives and they look very much like natural teeth. Here is the procedure that is followed in tooth implants:

• The damaged tooth or teeth are first extracted
• The jawbone is then prepared for surgery. Depending on the condition of the underlying bond, bone-grafting may be necessitated. In this case, the procedure will take longer than usual.
• A titanium screw or post in place in the hole that has been drilled into the jaw bone. This is then allowed to heal completely for a couple of months.
• The dentist will check if the wound had healed and will then affix the crown on the screw.

This entire procedure takes around two to three months. The healing itself takes a couple of months and the bone and tissue has to re-grow around this newly added structure. The condition of the jaw bone has to be good for the implant to be possible and successful. A weak bone base will not be able to withstand the pressure that the chewing motion of the mouth exerts.

The Latest in Dental Medicine

The one reason why many people hesitated to opt for this procedure is the time that is required for the implant to be accepted and the wound to heal. In rare cases this new addition may be rejected. But modern medicine has found a solution for that too. Platelet Rich Plasma or Plasma Rich Plasma is extracted from the patient's own blood. This is then used to hasten the healing process.

The bone grows faster and the wound heals quicker. There are very little chances of rejection as the plasma is admitted from the patient's own body. This procedure is used in sports medicine and orthopedics very successfully. It uses the natural healing properties of the body to heal the wound that is created by the implant … More

Compared to other developed nations, health care in Dubai is of very high quality. Hospitals (both private and public) boasts of the latest breakthroughs, modern facilities, competent doctors, and medical staff. People in Dubai have easy access to all their medical needs. As a matter of fact, the ratio of doctors to patients is very high in Dubai.

The same is the case with dental service in Dubai. Much like the overall medical care in general, dental services in Dubai are at par with that of developed nations.

For one, dentists in Dubai are very well-known for their competency in the field. Quite a number of dentists in Dubai have been trained in the best dental schools abroad, particularly in the United States and Canada, and have even undergone specialization studies in dental cosmetology, restorative dentistry etc. Good dental schools are also beginning to sprout in Dubai. As a matter of fact, the well-known Boston University has just signed a deal to open a dental school with the Dubai Healthcare City, this July 2008. This would mean that dentists in Dubai and from other regions will be able to study post- doctor dental education with a US-based curriculum, bringing in the latest technology and procedures.

The move to further develop dental services in Dubai is probably part of the government's program to improve its image as one of the best destinations for medical tourism. With the bleak future of pet dollars due to the decreasing supply and the movement for non-fossil fuel alternatives as a solution to global warming, it is just about time that the government looks for other steady sources of income for Dubai.

When on the look-out for the best dentists in Dubai, there are things that you can do to ensure you get your money's worth. Note that dental services in Dubai can get quite expensive, compared to the rates offered by dentists in other countries. Word-of-mouth is an easy way. Ask people around you as to which dental services they avail of. Chances are, people will be highly recommending the best dentists in the area.

Another option is to get a brief profile of the dentist. From what school did he or she graduate from? How many patients have they had? Were there any complaints from the patients? How many years of practice does he or she have? Dentists from reputable schools are safe choices … More

Dental implant is something that people would like to have now. It is because the cost is not so high nowdays and more and more people can afford it.

Before you receive the treatment, you certainly need to understand the dental implant procedure. If not, it would be quite difficult for you to look for the good services.

Before the formal dental implant procedure takes place, there would be preparation work necessary. The gum tissue would be opened to show the bone area out and bone grafting might be necessary if there is insufficient bone for the implant.

As long as the healthy bone is established, special drill would be used to make the bone prepared for the implant.

The first of the formal dental implant procedure would be to place the implant. The implant would be placed and then the tissue would be sutured.

There would usually be a special post being attached to implant and this would be important for supporting the new crown which is made of porcelain. In recent years, the technology would allow dentists to include materials like zirconium to the implant. This would usually help the clients have more natural teeth because the materials would give a natural color and feeling.

After that, the healing process would be something that follows. This is considered as one of the very important and natural dental implant procedure and you should not underestimate the importance of it.

You should remember that there are actually a lot of steps taken by the dentist in order to find the best dental implant procedure for you. The structure of teeth varies from person to person. Therefore, you can find that there are actually differences in the necessary procedures for you to get the implant completed. In other words, dentists actually need to do a lot of things to make the impressions for you and this would be important for them to ensure that the implant process would fit your teeth structure. If not, it would be really impossible for them to do the implant because you would soon realize that some discomfort would be felt. Yes, some of the poor dentists may fail to find the implant which fits the patient and it would not be a good thing because in some serious cases there might be a need for the dentists to throw away all the works done and … More